Do you have an old ADT door sensor lying around and you're not sure what to do with it? Why not repurpose it for a useful use? This blog will show you how to transform an old ADT door sensor into a water leak detector with the help of SmartThings.
SmartThings is an IoT platform that allows you to automate and control your entire home from a single app. With SmartThings, you can connect and control hundreds of devices from different brands, including lights, thermostats, cameras, and sensors.
To get started, you will need an ADT door sensor, a SmartThings hub, and a Sump Pump Water Sensor. The Sump Pump Water Sensor is a small device that can detect water leaks and send alerts to your phone.
The first step is to remove the brand name and reset the ADT door sensor. To do this, press and hold the tamper switch on the side of the sensor for 10 seconds until the LED light flashes red. Then, release the tamper switch and press and hold the battery test button until the LED light flashes green. This will reset the sensor to its default state.
Next, connect the ADT door sensor to the SmartThings hub. Open the SmartThings app and go to the Devices tab. Click on the Add Device button and follow the instructions to add the ADT door sensor to your network.
Once the sensor is connected, you need to create a custom automation to trigger the Sump Pump Water Sensor when a water leak is detected. Go to the Automation tab and click on the Add Automation button. Select the If This Happens option and choose the ADT door sensor as the trigger. Then, select the Water Sensor as the action and choose the notification settings.
Now, when the ADT door sensor detects a water leak, it will trigger the Sump Pump Water Sensor and send you an alert on your phone. This will help you to detect water leaks early and prevent costly damage to your home.
Repurposing an old ADT door sensor for water leak detection is a simple and cost-effective DIY project that can add value to your home automation setup. It's also a great way to reuse old devices and reduce electronic waste.
In conclusion, if you're looking for a simple and practical DIY project to improve your home's energy efficiency and prevent water damage, consider repurposing an old ADT door sensor into a water leak detector. With the help of SmartThings and a Sump Pump Water Sensor, you can create a smart and effective solution that will keep your home safe and secure.